Embedded Files
Events
BayLiner Ciera 2855 9.5M, 3.2 Ton, 7.4L Collected from Half Moon Bay, Engine not working due to growth, towed to Drummoyne via boat, loaded on trailer at Drummoyne ramp, scraped clean leg, hull, taken to Beverly Hills, craned off trailer and placed on Hard Stand, BTW we ate the muscles and oysters that we scraped off the boat (only playin).
Mustang 2800 Series 8.6M, 2.9 Ton, 5.7L Collected from Abbotsford Bay, Engine not working, towed to Drummoyne via boat, loaded on trailer taken to Concord, scraped clean leg, presure washed, hull, anti fouling, pulled Mercruiser engine out with a forklift, rebuilt block and heads of engine.
SeaRay 275 Sundancer 7.5M, 3.1 Ton, Collected from St George Motor Boat Club, Sans Souci, Engine and Leg Rotten, not working, towed to Abbotsford, scraped clean leg, hull, anti fouling, repaired Mercruiser 5L MPI and Bravo 3 leg and placed back into the water
d' Albora Marina Rushcutters-Bay - New Tender Boat 6.5 Mts Load via Crane onto Trailer - Transported to Tarren Point.
d'Albora Marina - Akuna Bay - Ku-ring-gai Park; Conducted Boat inspection/survey- negotiated price further down from Seller on behalf of purchaser. Transported Sea Ray 220 via Trailer to Five Dock Bay, provided temporary mooring. Repaired items (water pump, toilet, and electricals) on boat for new owner.
Mustang 2800 8.6M, 3.2 Ton, Conducted pre purchase inspection with compression & fuel pressure Test. Collected at Yowie Bay, loaded on trailer, high powered pressured cleaned, scapped at Ramp, taken to Drummoyne Boat Ramp, conducted futher service on Motor, assisted polished and placed on a our loan mooring near the private marina. Provided Tender for the client.
Sea Ray 330 Twin Volvo Engine 6.5 Ton, 36 foot. Loaded and Collected at Cooks River Kyeemagh. taken to clients yard, via escot/pilot driver. The client high powered pressured cleaned, scapped, fixed water hose leak, replaced bellow, service the volvo engines and stern drive legs. Luke the client is wonderful human with blessed family.
Water Taxi 35 RIB (10 Metres) 4.5 Ton, 16 Seater Boat Collected from Storage, Taken to Yard for Client, We cleaned bottom Hull, and provided AntiFouling, Client Motor Replacement, Service, then placed into water at Drummoyne Boat Ramp
Sea Ray 240, We towed via water to boat ramp to place on trailer (Engine not working), scaped sea growth off, pressure water cleaned twice (external and internal, vacummed cleaned), primed stern drive Bravo 2 Leg and Moving parts and then applied Tri Lux (x2), prime hull, applied Micron Anti-Foul (x2). Engine was not running, fixed fuel sender issue, tuned up, replace plugs, oil, oil filter. topped all fluids etc. Engine now works fine for the first time in 2 years. Placed back in water, conducted detailed long water test drive with client, and provided temporary mooring. Client was super happy and excited to use his boat for the summer.
BayLiiner 5 Ton Boat 11 Mtrs (35 Foot) 3.8 Beam. Collected from Gladesville Bay, Towed by Boat, Loaded on Trailer. Conducted a deep clean (10cm thick of sea growth),after 4 years in the water, welded crack on rotten Volvo penta 290 Leg, machined casted. Sourced new and second hand parts. Assisted Boat Owner with Antifoul, cleaned carbs, turned engines and ready to be put back into the water.
Mariner 34 Foot (10.5 Metres) Boat 3.6 Beam. Collected from Bayview Park Boat Ramp, Loaded on Trailer without a Bow Eye (Hence we had emphasis using specific strap connecting to the boats clits). Taken to Client's Yard for deep clean due to significant growth, weld crack Transom Assembly, Replace Leg/Gears (Volvo Penta DP Leg) 4 Weeks Later the Boat was returned back into the water looking like new. Photos as taken out of the water - Post Repairs; replaced volvo stern drive leg, serviced engine, fiberglass support, fixed upholstery fabric and New Anit Fouling. Client was happy use his boat for the Summer.
Mustang 2800 III, taken out from Five Dock Bay, placed on trailer. The boat will not go more than 2 knots. We cleaned, Hull and Volvo Stern Leg, pressure washed x2 (external and internal), polished hull, and then applied Tri Lux (x2), prime hull, applied Micron Anti-Foul (x2). Tuned up, replace plugs, oil, fuel and oil filter, clean injectors. Fixed power trim leg (not going up) topped all fluids etc. Fiberglass patch hole in hull. Placed back in water, conducted detailed long water test drive with client. Client said he has never seen his boat travel and plain that fast ever before. He was over the moon, super happy and excited to use his boat for the summer.
BayLiiner 3.5 Ton Collected at Berowra Waters Boat Ramp Taken, Drove to Farm at Windsor and placed on Hard Stand. Leader Signal Escort convoy car required - in front of Towing Car, as the roads traveling from Berowra Waters, very steep mountain bush roads.
Sydney - Northbridge to Tamworth Country NSW, 8 hours all night drive. Mariner Boat with a High Fly- Bridge, Diesel Engine. Client drove with ease on Heavy Duty Tri- Axle (6 wheeler) 5.5 Ton Trailer, came with spare tyres and bearings but not required.
Mariner Fly-Bridge Twin Engine, 5 Ton Boat, From Port Macquarie to Sydney. Client required assistance as he had little experience.
Hdra Sports Collected from Riverview Boat Ramp (Lane Cove River) placed on trailer. Boat has not been cleaned for a long time. We cleaned, Hull pressure washed x2 (external and internal), FULL DETAIL INSIDE AND OUT. Remove all Rust Stains. Clean areas of the boat that have never been cleaned before. Applied Tri Lux (x2), prime hull, applied Micron Anti-Foul (x2) at the transom area. Yamaha F250 Outboard, Tuned up, plugs, oil, fuel and oil filter, repair rust at motor . Placed back in water, conducted detailed long water test drive with client. Client said he has never seen his boat so clean.
RAY GLASS PROTECTOR 9 Metre. CABIN RHIB Twin Yamaha 250 Hp, Taken out for Service
BayLiner 32 Foot, 5 Ton, Taken Out from Tarren Point (Ramp) and Travelled 600Km to Baradine and placed on Hard-Stand
Pontton Floating Collected from Tarren Point take and place in water in Akuna Bay, Pittwater
SeaRay 240 Sundeck 7.9M, 2.8 Ton, 5.7L Collected from Tuggerah Central Coast (Newcastle) NSW, Transferred to Sydney. Blown Inboard 5L Enginer removed. Removed Leg, Fibreglass, patched rear opening, holes and will converting to outboard for the owner.
SeaRay 275 Sundancer 7.5M, 3.1 Ton, Collected from St George Motor Boat Club, Sans Souci, Engine and Leg Rotten, not working, towed to Abbotsford, scraped clean leg, hull, anti fouling, repaired Mercruiser 5L MPI and Bravo 3 leg and placed back into the water
Above is only some of the of the many projects and task we have completed. This list of tasks is too much to place on this web site
Page updated
Google Sites
Report abuse